Test Scenario

Make an Echo request from SCU when the SCP is not ready.

Steps

1. Switch to Storage SCP mode.

2. Stop Storage SCP service, if it is running.

3. Switch to Echo SCU mode by either clicking on the ECHO SCU button in the Mode window of the main window or by selecting Echo SCU from the Modes menu.

4. Select the storescp value in the Calling AE Title combo box in the main window.

5. Finally, click on the SEND button to initiate an Echo request.

Result

The Echo request will fail because there is no Echo SCP running to respond to the request.

The Log: